NEWSLETTER
NEWSLETTER
Welcome to the Huegli Tech Newsletter. Please find our newest products and news and thank you for your interest in the company Huegli Tech AG.
If you have additional questions about the presented products, don’t hesitate to contact us under sales@huegli-tech.com.
Kind regards
Hügli Tech AG
Presentation of new Products
The InteliDrive Mobile is a highly flexible sophisticated mobile electronic controller, which features outstanding control, monitoring and protection for diesel and gas engines as well as driven technology. The new controller offers a range of specific functions suitable for mobile applications like hydraulic system control, communication with sensors and operational devices control.
InteliDrive Mobile [ID-Mobile] Electronic Controller for Mobile Applications
InteliDrive Mobile [ID-Mobile] Electronic Controller for Mobile Applications
- Engine specific, plug and play support of engines with ECU – access to all available values, without the need for programming
- Designed specifically for harsh environment – trouble free operation in all conditions
- Built-in Event & Performance Log - easy troubleshooting and warranty claim handling
- Remote monitoring support – reduced call-out costs of service engineers
- Internal GPS+GSM modem for fleet management and localisation (optional)
- Hydraulics systems control
- Diesel and gas engine control, monitoring and protection
- Internal – configurable PLC functions
- 16 configurable binary inputs, 16 configurable binary outputs
- 8 configurable analog inputs, 8 configurable analog outputs/inputs
- Communication interface: RS485, 2xCAN, J1939, Modbus, etc.
- Various displays available: 4.25” FTSN, 6.5” VGA, 8” TFT
- IP 67
InteliCompact NT controllers are designed for simple single and multiple set applications, which require automatic mains failure along, paralleling and load sharing functions. The models (SPtM and MINT) in the range feature standard and proprietary CAN J1939 communication for a wide range of popular engines.
InteliCompactNT
- Compact controller for gen-sets operating in multiple island and/or parallel to mains mode
- Built-in automatic load dependent start/stop system (power management)
- Full gen-set monitoring and protection
- Possibility to connect up to 8 gauges to display engine values
- True voltage and current RMS measurement
- Outstanding EFI engine support with diagnostic messages in plain text
- 3 phase generator voltage and current measurement
- 3 phase busbar voltage measurement
- 3 phase power measurement
- 3 analog inputs
- Event and performance log
- 2 languages (user changeable)
Because the JDR Series is a universal diagnostic code reader, its application is not limited to any particular engine manufacturer or engine size. lt is easily installed, which makes it ideal for aftermarket prospects, and, it's extremely rugged so off-limit applications are never an issue for this device.
| Features | JDR050 | JDR100 | |
|---|---|---|---|
| Displays Active and Stored Codes from Up to 10 ECUs |
|
|
 |
| Displays RPM, Oil Pressure, Coolant Temperature, Fuel Level, Battery Voltage, and Engine Hours |
|
||
| Low Power Consumption |
|
|
|
| Wide Temperature Range (-40 to +85°C. -40 to +185°F) |
|
|
|
| Two Button Operation |
|
||
| Three Button Operation |
|
||
| Built in CANBus Termination Resistor |
|
|
|
| Self Contained, No Configuration Software Required |
|
|
|
| Sealed Case, Non-Fogging Display |
|
|
|
| Front is Rated to IP67 – Seal from Direct Exposure to Water Spray |
|
|
|
| With Deutsch DT06-6S Style Connector, Rear is Rated to IP69K |
|
|
|
| Fits in 2” (51mm) Round Standard Panel Opening |
|
|
|
| Simple Slide Latch Mounting Ring |
|
|
|
| CH-417-4572 cable to JDR, loose with EC-1331 connector and CAN bus termination jumper |
|
|
|
| CH-418-4572 cable to JDR, loose with EC-1331 connector without CAN bus termination jumper |
|
|
|
| EC-1331 Deutsch Connector to JDR |
|
|
CVR-100
The CVR100 Voltage Regulator is a half-wave, 63-volt, 6-Amp automatic voltage regulator designed for brushless alternators. The unit is designed for 50Hz or 60Hz operation with under frequency compensation, over-excitation shutdown and EMI Filtering. The CVR100 offers high performance AC voltage regulation operation at an affordable price. Steady state voltage regulation is less than ±0.5% with rapid response to load transients. This is due to the high-speed voltage sensing and control circuitry GAC has incorporated into CVR100. A STABILITY adjustment is used to optimize regulator performance for load transients on the generator.
Upcoming Exhibitions (Kopie 1)
Intermat 2009
We are pleased to announce our presence at the Intermat 2009 exhibition, held at Paris, France, April 20 till 25th, 2009.
We look forward to welcome you at our booth no: P003, Hall No 5B.
Where can you get an entrance card?
Please contact us under sales@huegli-tech.com for a free ticket!
Or reserve your ticket online trough the INTERMAT website. This will cost you 25 EUR.
Presentation of our booth: 
Certificate Germanischer Llyod
Certificate Germanischer Lloyd
Marine Type Approval for IG-NT Marine and IS-NT Marine finalized
Download Certificate
Upcoming Exhibitions
Power 2009
We are pleased to announce our presence at the Power 2009, International Power and Generating sets Exhibition held at the New International Expo Center, China, April 08 till 10th, 2009.
We look forward to welcome you at our booth no: 5T016A, Hall No W5.
Enermotive 2009
We are pleased to announce our presence at the Enermotive 2009, exhibition held at Milano, Italy, May 26 till 30, 2009.
We look forward to welcome you at our booth no: 18P, Hall No E39.
