NEWSLETTER
NEWSLETTER
Welcome to the Huegli Tech Newsletter. Please find our newest products and news and thank you for your interest in the company Huegli Tech AG.
If you have additional questions about the presented products, don’t hesitate to contact us under sales@huegli-tech.com.
Kind regards
Hügli Tech AG
Presentation of 
Products
Hydraulik1
Huegli Tech AG is a leading manufacturer of hydraulic starting systems.
Based on decades of extensive experience and know-how we build optimised starting systems for a wide range of Diesel/Gas Engines and Turbines providing fail safe, reliable starts under extreme environmental conditions.
We supply both standard systems to major OEMs and systems completely tailored to special applications.
We specify and manufacture systems using components from well-known manufacturers and including key parts of our own design.
Hydraulik2
Your Benefits:
- Higher cranking speed, results in very reliable start
- Same high torque even down at -40°C
- Spark free option, ideal for fire hazard areas
- Black start capability, with hand-pump for manual accumulator recharging.
Starting is always possible, anytime, anywhere - Approved by classification societies
- Virtually maintenance free – Low lifetime costs
- Adaptable to any engine and application
Presentation of 
Products
The BCD1-8 is a microprocessor controlled ignition system that combines the advantage of the inductive and the capacitive type ignition in one product.
Each BCD1-8 can supply up to 8 Cylinders. Two units can be configured in a Master/Slave configuration, with the included Easy Fire software, for engines with up to 16 cylinders.
The BCD1-8 produces alternating current (AC) sparks, which reduces the wear of the spark plug. The energy and the spark duration levels can be controlled, for best combustion and longest spark plug life.
Many parameters, e.g. No. of Cylinders, Firing Angle, Strike Mode (Reduced Power, Single- or Double-Strike), Ignition Timing etc. can be set via CAN Bus from the AF-2000 Lambda Controller, eliminating the need for an on-site Laptop.
BDC Features
Features
- Combination of capacitive/inductive
- Alternating current spark (AC)
- User programmable ignition curve
- RS-232 communication link
- Two programmable energy levels
- Up to 8 cylinders. 12, or 16 cylinders are possible in cascade mode
- 2 outputs sinking up to 1Amp. at +25°C and up to 0.5 Amp. at +15°C
- 1 Sensor input 0-5V
- 2 general trigger inputs, VR (passive) or Open collector (active)
- Trigger signals from ½ engine speed disc or from Engine control module EMC
- Overspeed shutdown
Download overview complete system
Presentation of 
Products
If so, there is a constant risk where gas or petroleum vapors can be drawn into the engine, causing uncontrolled runaway.
Chalwyn2
Engines that runaway may suffer from catastrophic mechanical failure or valve bounce, leading to a flashback. The consequences of this may be an explosion.
Chalwyn diesel engine safety products have become increasingly accepted within the international petrochemical industry as an essential safety upgrade for all diesel engines that work in or near hazardous areas.
From places as diverse as the drilling platforms in the Gulf of Mexico, the Liquefied Natural Gas plants in Qatar, the cool mines of Australia, and the refineries of Europe... Chalwyn shutdown valves have been there to protect engines, personnel and facilities from the catastrophic consequences of uncontrolled engine runaway.
New equipment or existing diesel engines can be easily and cost effectively upgraded to give your facilities this vital improved level of safety and help to prevent an explosion or fire.
Presentation of 
Products
a proven family of technology driven control solutions
This innovative controller is available in engine specific versions, supported by J1939 and RS485 / MODBUS communication lines to ensure smooth and complete compatibility with onboard electronic systems for a wide range of mobile equipment. It has been designed to excel in typically harsh mobile applications or extreme temperature situations and has been constructed to withstand typical industry shock and vibration loads.
ID-Mobile2
Typical mobile and off-road machinery applications featuring control & monitoring products
- Construction machinery
- Material handling
- Cranes
- Mining
- Agricultural machines
- Forestry machines
- Municipal vehicles
- Maintenance & Fire-fighting equipment
- Military
for Industrial and Construction equipment
for InteliDrive Mobile Controls
ID-Mobile from ComAp was selected for CAT-wheel loader, with rugged special cab suitable for underground mining-applications
Inteli-Drive Mobile
ID-Mobile has been specified because of it’s ability to concentrate the additional safety architecture, required for subject applications, all in one box.
It greatly cuts down on wiring and general installation costs.
The InteliMonitor software for remote purpose or maintenance, presents a total overview within one single window, on every PC or Laptop.
Even fleet management is a plug and run function, thanks to the additional available GSM and GPS plug-in modules in ID-Mobile
The integrated dynamic camera function into the 6,5” colour display, eliminates the need for another display.
The NPU is 3-phase mains protection unit for applications with generators operating in parallel to mains. It provides adjustable voltage, frequency and vector shift protections to preserve both the power supplier and the generators.
The NPU offers convenient display of mains voltage and frequency measured values and fast indication of mains voltage failure via indication LEDs and output relays. Wide range of models featuring various rated voltages, frequencies and supply voltages enables NPU to be used for large scale of applications.
NPU-FUV2
Benefits
- Satisfies G59 guidelines
- 3-phase mains protection
- Effective compact solution
- Reliability proved by years of operation
- Performance ratio for competitive price
- Rated voltages:100, 230, 400, 480 VAC
It’s a modular panel-mounted protection solution from ComAp for generators operating in parallel to mains applications.
It incorporates a wide range of protection features, which include: voltage, frequency, vector shift, rate of change of frequency (ROCOF), directional overcurrent, NVD and reverse power.
The advantage of InteliProtec is its flexibility - the user is able to request the specific protection requirement to suit the particular application, amend setpoints from facia and view history of events on the graphic LCD screen.
InteliProtect2
Benefits
- Integrated protections solution – less wiring and components
- Designed with the aim of satisfying the G59, ETR113, G77, G83 and G10 guidelines
- Remote monitoring provided
- Tailor-made configuration, several configuration to suit customer requirements
Presentation of 
Products
EAM2
The currently available, wide selection of GAC EAM modules are electronic interfaces designed to make it easy to use GAC units in combination with those of other manufacturers.
Various types are available e.g. to facilitate GAC synchronizer (SYC-6714CE) and load sharer (LSM-100/672/201) communication with electronic engine controls from other brands or to allow GAC engine control units to work with existing synchronizers and load sharers.
This makes it easier than ever to integrate GAC components in any system, especially for the latest generation of various electronic-fuel-injection controllers (ECU).
Hydraulik3
Marine Classifications of
Hydraulic starting systems
Design according
chalwynmovie
Klick here to learn more about Chalwyn applications
ID-Moblie3
InteliDrive - Mobile
Engine control case studies
(click on the pictures to enlarge)
Wheel loader
Crusher
Shunting loco
Unscribe
Unscribe
If you wish to unscribe to our newsletter, please reply with the word "Unscribe" in the header or send an E-Mail to sales@huegli-tech.com.
