NEWSLETTER
NEWSLETTER
Welcome to the Huegli Tech Newsletter. Please find our newest products and news and thank you for your interest in the company Huegli Tech AG.
If you have additional questions about the presented products, don’t hesitate to contact us under sales@huegli-tech.com.
Kind regards
Hügli Tech AG
Presentation of 
and 
Products
CU2-05 High Tension Coil2
The CU2-05 Coils consist of the upper part, which is the coil itself, plus a screwed on extension that fits right on to the spark plug. Hence, no separate high tension cables are required. The coil incorporates an integrated connector and two fixations to be screwed to a common bracket. Unique is the internal insulation, it is a synthetic ester based insulating liquid, which does not restrict internal micro expansions, and which provides a self healing effect. A feedback signal is available that can be used for combustion information and spark diagnostic.
Presentation of 
Products
GAC's Speed Control Units are precise speed controls designed and manufactured in various configurations to meet application requirements using the latest analog and digital control technologies. Reserve battery polarity and fail-safe protection in the event of loss of speed sensor signal or battery voltage is incorporated in very GAC Speed Control Unit. A wide variety of application needs can be satisfied with GAC's constant or variable speed governing, in isochronous or droop operation.
ESD-5556
ESD-5556 - Speed Control Unit
The ESD-5556 is the latest speed control from GAC with all the features of the ESD-5550 family but with additional two element speed switch for over speed and crank termination at a reasonable price.
Presentation of 
Products
Enables an easy integration of the InteliDrive-Mobile controller into any type of mobile vehicles, which contain electronic controllers, sensors, operational devices and/or hydraulic systems.
ID-Mobile2
The ID-Mobile Service Module (ID-Mobile SM) allows Engineers and Technicians access to any of the 96 signals available on the ID-Mobile controller very comfortably. This can be done: through PC – tools (e.g. DriveMonitor and/or DriveConfig that can be downloaded free of charge from the Internet) via USB connection and/or using any kind of usual measuring instruments (e.g. a multi-meter and/or an oscilloscope etc.).
With the ID-Mobile SM, it is possible to make quick measurements, simulations, diagnostic testing and repairs at any time.
Download ID-Mobile Service Module complete overview
Download ID-Mobile Brochure
New Application Reference
ID-Mobile-Appl.2
Globe Drill has selected several years ago ComAp’s InteliDrive engine controller range for all their high-end drill-rigs, which come in different models.
Mainly because of the vast system capabilities and application flexibility, to control the MTU 2000 engines and all the accessory equipment, including the Sullair dual volume air-compressor.
Also the flexible human-interface solutions via various front-end displays have been a key point.
IG-NT Marine / IS-NT Marine / ID-DCU Marine / GeCon
Marine certified control units from ComAp are designed for a very wide range of applications.
IG-NT-Marine
IG-NT Marine
InteliGen Marine is a comprehensive controller for both single and multiple gen-sets operating in standby or parallel modes. Built-in synchronizer and digital isochronous load sharer allow total integrated solution for gen-sets in standby, island parallel or mains parallel. Native cooperation of up to 32 gen-sets is a standard feature. InteliGenNT supports many standard ECU types and is especially designed to easily integrate new ones. Powerful graphic display with user-friendly control allows even new users to find quickly the required information.
If needed, IM-NT Marine can be used for connecting a group of gen-sets to the mains.
Download IG-NT Marine Datasheet
IS-NT Marine
IS-NT Marine
InteliSys Marine is an expandable controller for both single and multiple gensets operating in standby or parallel modes, especially for complex applications. Detachable construction is optimized for easy installation. Built-in synchronizer and digital isochronous load sharer allow total integrated solution for gen-sets in standby, island parallel or mains parallel. Native cooperation of up to 32 gen-sets is a standard feature. InteliSysNT supports many standard ECU types and is especially designed to easily integrate new ones. Powerful graphic display with userfriendly control allows even new users to find quickly the required information. The display in a basic version is capable to display graphical languages too (e.g. Chinese).
ID-DCU-Marine
ID-DCU Marine
InteliDrive® DCU-Marine is an engine controller from ComAp designed specially to meet the demanding needs of the marine market; providing a high level of performance coupled with extensive communication capabilities and incorporating hardwired safety functions and primary/secondary power switching.
GeCon
GeCon
GeCon provides comprehensive generator protection and control for single or multiple gen-sets based on field proven InteliGenNT and InteliSysNT
platforms. Special versions optimized for use in marine and land-based installations allow customers to select a tailored solution for their application with the option of modified options for critical applications.
Hint: Only units marked as Marine are protected by the certificates from Marine societies!
Presentation of 
Products
Hydraulik1
Huegli Tech Ltd is the Manufacturer’s Representative of Kocsis Technologies Inc. (KTI) in Europe, Middle East and Asia.
KTI is a leading manufacturer of high quality Hydraulic accumulators, located in the USA.
What is an Accumulator??
An accumulator is a pressure vessel in which fluid is stored.
Typically, an accumulator contains a compressible gas, a separator (i.e. piston, bladder diaphragm, etc.), and an incompressible hydraulic fluid.
The compressible gas behaves much like a spring, which allows energy to be stored and dissipated, while the separator transfers these changes in energy and volume to the hydraulic fluid.
Accumulators help designers control the power and flow-rates of hydraulic circuits.
Accumulator Functions:
- Shock Suppressor
Absorbs hydraulic spikes and reduces damage to the system - Shock Suppressor
Stores fluid under pressure until it is required - Leakage Compensator
Restores lost fluid and maintains system pressure - Supplements Pump Flow
Offers additional flow during high demand cycles - Thermal Expansion and Contraction Compensator
Provides compensation for changes in fluid volume due to temperature changes - Fluid Dispenser
Supplies various fluids under pressure
Presentation of 
Products
(SHUT OFF) VALVES
D-Valve2
If flammable gas or vapour is drawn into the intake of a diesel engine it acts as an additional ungoverned fuel supply. When this occurs the only certain way to stop the engine is by the operation of an air intake shut down (shut off) valve. Failure to stop the engine can result in uncontrolled engine overspeed followed by mechanical failure or flash back from the intake resulting in ignition of the surrounding flammable atmosphere.
- Automatic overspeed air intake shut down device
- Gives rapid response to any unexpected overspeed (runaway) of the diesel engine
- Closes automatically when the engine speed exceeds a preset point
- Positively prevents a flash back explosion or engine internal damage by reliable operation
- Gives confidence of best safety practices for the operators
- No speed signal sensing or external power source required
- Valve resets back to open soon after the engine has stopped, so engine is ready for re-starting
- High reliability driven by simple mechanical design
- Tamper resistant internal speed adjustment
- Low price point relative to external input systems
- Requires no manual intervention after pre-setting
distributor
New Huegli Tech Distributor in Germany
The increasing expectations of our capabilities is a sign of trust from our customers. At the same time they demand constant changes in our strategy and requirements.
On 28th April Huegli Tech signed a new Distributor Agreement with ScanDiesel GmbH of Bremen for the representation of the Huegli Tech portfolio in Germany, beginning on 1st July.
ScanDiesel GmbH have established themselves in the German market as importers of innovative and well-known diesel engine technology from Scania, Sisu Power, Mitsubishi and JCB Power Systems. Their customers include Genset and Equipment manufacturers, Power generation companies, Shipbuilders and companies in the building and farming industries.
You can find more detailed information regarding our new Partner at:
ScanDiesel GmbH
Your Partner for Engines and Components
Mr. Roland Schmidt
Ermlandstraße 55
28777 Bremen
Tel.: +49 421 67532-12
Fax: +49 421 67532-20
info@scandiesel.de
www.scandiesel.de
ID-Moblie5
InteliDrive - Mobile
Hydraulik3
chalwynmovie
Klick here to learn more about Chalwyn applications
Unscribe
Unscribe
If you wish to unscribe to our newsletter, please reply with the word "Unscribe" in the header or send an E-Mail to sales@huegli-tech.com.
