ALR-190 Series actuators

The ALR-190 Series Integral Actuator is designed to mount integral to various injection Pumps of small engines.  No external linkage or brackets are required to install this actuator.  Also, when de-energized the ALR-190 Series electric actuator provides the function of fuel shutoff solenoid.  This is accomplished by internally moving spring-loaded the fuel-rack to the no fuel position.

Installing the ALR-190 Series actuator does not defeat the engine’s mechanical governor operation.  During the installation process, the mechanical governor is set 200-300 rpm higher than the electric governor’s operating speed.  In this configuration the mechanical governor acts as an overspeed protection and engine-power limiter, within engine manufacturers specifications.  

The electromechanical design used in the ALR-190 Series is field proven and provides a proportional actuator movement based on the actuator coil current.

Download ALR-190 Series Datasheet

100 SERIES (Stanadyne D series pumps)

The ADC-100 Series Integral Actuator is designed to mount directly to Stanadyne "D" Series fuel injection pumps. When the ADC-100 is installed on the fuel pump, an integral high performance fuel control systems results. No external linkages or brackets are required an no extra Stanadyne parts are needed.

Download ADC-100 Series Datasheet

ADC-100 Series actuator

ADB-120 Series actuator

ACD-175 Series actuator

ACB-275H Series actuator

ACB-2001 Series actuator

Locomotive Control 1

Locomotive Control 2

Locomotive Control 3

Marine Control 1

Mobile Loader