HT-SG-300 - Speed Control Unit - InGovern Series

The HT-SG-300 is an electronic speed governor for conventional diesel engines. Its digital processing not only provides flexibility in configuration but also allows CAN J1939 data exchange with many modern controllers.

The unit will internally convert the signal from a standard inductive flywheel pick-up to an RPM value, display it on the 4-digit LED display and also send it as a standard J1939 value to a connected controller.

If the RPM exceeds the set Overspeed value, the unit sends the standard J1939 value to a connected controller.

The HT-SG-300 is supplied pre-configured and once the number of flywheel teeth is input (1 x press of [Fn] button then [+] or [-] until the correct value is displayed) then the engine will run. All parameters are stored in non-volatile memory.

The final configuration can be saved and downloaded to other HT-SG-300s for multiple engine applications or for series production.